When a buyer, seller, or lender asks what an aircraft is worth, the engine is almost always the single largest variable in the answer. And among the many ways an engine’s condition gets described, few carry more weight — or more confusion — than the difference between factory rebuilt and overhauled. The two terms are often used interchangeably in casual conversation, but they are distinct regulatory categories that produce meaningfully different values. Understanding why is central to any credible appraisal.

The Regulatory Foundation

The terms are not marketing language; they are defined under FAA regulation (FAR 43.2), and the definitions govern who can perform the work and what may be claimed afterward.

An overhaul can be performed by any appropriately rated repair station or certificated mechanic with the proper authorization. The engine is disassembled, cleaned, inspected, repaired as required, reassembled, and tested. Critically, parts may be restored to service limits — the more generous wear tolerances an engine is permitted to operate within — rather than to new-part specifications. The engine’s logbook is not reset. It continues to carry its total accumulated time, and the work is documented as time since major overhaul (SMOH).

A rebuilt engine occupies a higher and more restricted tier. Only the original manufacturer, or an agency the manufacturer specifically approves, may legally call an engine “rebuilt.” Every component is restored to new limits and tolerances, using new or used parts that meet new-part specifications. The defining feature, and the one that drives the value gap, is that a rebuilt engine receives a zero-time logbook. Its prior operating history is legally erased and the engine is documented as zero time since new — the same status as a factory-new engine.

That single distinction — a wiped history versus a continued one — is where the valuation difference begins.

Why the Market Pays More for “Rebuilt”

The value premium attached to a factory rebuilt engine rests on three pillars: standardization, documentation, and risk transfer.

The first is tolerance consistency. Because a rebuilt engine is held to new limits across the board, a buyer is not left guessing how much usable life remains in marginal components. A service-limits overhaul, by contrast, may legitimately reuse parts that are worn but still within allowable limits. Two overhauled engines with identical SMOH figures can therefore differ substantially in real remaining value depending on how the shop approached those tolerances.

The second is clean documentation. The zero-time logbook removes ambiguity. A prospective buyer, insurer, or lender sees a clear starting point rather than a long and sometimes incomplete operating history. In a market where documentation gaps routinely depress value, a fresh and authoritative record is itself worth money.

The third is risk and warranty. Manufacturer rebuild programs typically carry warranty coverage comparable to new engines, and the manufacturer’s name on the work transfers a measure of risk away from the buyer. An overhaul’s warranty, where it exists, comes from the shop that performed it and varies widely in scope and credibility.

Where Overhauls Hold Their Ground

None of this means an overhauled engine is simply a lesser product. A well-executed overhaul from a reputable facility — particularly a “new limits overhaul,” in which the shop voluntarily restores components to new specifications rather than service limits — can approach rebuilt quality at a lower cost. For many owners, that represents the more rational economic choice, especially on airframes where a manufacturer rebuild program may not even be offered.

The key variable on the overhaul side is shop reputation and scope. The market discriminates sharply between a recognized engine facility and an unknown one, and between a new-limits overhaul and a bare service-limits pass. Two engines described identically in a listing can command very different prices once the underlying work orders are examined. This is precisely why the SMOH figure alone is never sufficient for valuation; the quality and documentation behind that number matter as much as the number itself.

How an Appraiser Treats the Difference

In practice, the distinction enters a valuation in several places at once. Time since the event — whether SMOH or time since the rebuild — is weighed against the manufacturer’s recommended time between overhaul (TBO). Remaining hours to the next event are typically the most influential engine factor in the value calculation, and a zero-time rebuilt engine simply starts that clock from the most favorable possible position.

Beyond raw time, the appraiser considers the credibility of the work, the completeness of supporting logs, the warranty status, and whether any life-limited components were replaced or merely inspected. A rebuilt engine tends to score well across all of these simultaneously, which is why the value premium is real but also why it is not a fixed dollar figure — it scales with the engine type, the airframe, and current market conditions.

The Practical Takeaway

For buyers and sellers, the headline is straightforward: “rebuilt” is a protected, manufacturer-only designation that restores an engine to new limits and resets its logbook to zero, while “overhaul” is a broader category whose value depends heavily on who did the work and to what standard. The rebuilt engine generally commands a premium, but a strong new-limits overhaul from a respected facility can narrow that gap considerably.

For anyone relying on a valuation — whether for a sale, a purchase, financing, or insurance — the lesson is to look past the label. The most defensible figure comes not from the word in the listing but from the logbooks, work orders, and tolerances behind it.


Everette Aviation LLC provides USPAP-compliant appraisals for helicopters and business aircraft. For questions about how engine status affects the value of a specific aircraft, contact us to discuss a desktop or full appraisal.

Click to rate this post!
[Total: 1 Average: 5]
Published On: June 25th, 2026 / Categories: Uncategorized /

Click to rate this post!
[Total: 1 Average: 5]